MidNite Solar MNSPD-115 Surge Protection Device

As an Amazon Associate I earn from qualifying purchases.
1
MidNite Solar
#ad
MidNite Solar MNSPD-115 Surge Protection Device
#ad
MidNite Solar MNSPD-115 #ad - It is designed for both ac and dc systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Protection for battery circuits. The midnite solar surge protector device MNSPD is a Type 1 device per UL1449 rev3.
More details
#ad
2
Midnite Solar
#ad
Midnite Solar-MNEPV15
#ad
Midnite Solar MNEPV15 #ad - Breaker torque value: 20 In-Lbs 2. 3nm. 150vdc din rail mount breaker 13mm wide. Midnite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Midnite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. Breakers ordered under the cbi part numbering system will not be listed for 150VDC and in many cases are not suitable for the solar industry.
10, 000 aic. Always use a properly sized breaker for disconnecting. 150vdc etl listed in the US and Canada. All of the NRTL listings still apply. All midnite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Mnepv breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry.
MidNite Solar MNSPD-115 Surge Protection Device #ad - Branch circuit rated 489A.
More details
#ad
Similar products
3
MidNite Solar
#ad
Midnite Solar Photovoltaic Combiner - 3-Position, Model# MNPV3
#ad
MidNite Solar MNPV3 #ad - U. S. A. Din rail for breaker mounting. And canada; check individual photovoltaic specs for required series fuse circuit breaker rating. Class rating: etl listed, compatible With: 150V breakers, Dimensions L x W x H in. 10 1/2 x 5 x 3 1/2, mount type: wall includes positive bus bar, material type: rainproof nEMA 3R aluminum enclosure, Capacity: 3-150V breakers, Accessory Type: Photovoltaic combiner, Enclosure Type: Injection molded insulating deadfront under aluminum flip-up exterior cover, negative bus bar.
MidNite Solar MNSPD-115 Surge Protection Device #ad - Dc breakers protect wiring from potential fire in the event of module failure. Handles three 150V DC breakers. Knockouts for electrical connections and lightning arrestor mounting. This midnite solar photovoltaic combiner accepts dinrail mount breakers, ensuring compliance with NEC requirements for combiners when more than 2 strings of photovoltaic modules are installed.
Etl listed for use in the u. S.
More details
#ad
Similar products
4
MidNite Solar
#ad
Midnite Solar Photovoltaic Combiner - 6-Position, Model# MNPV6
#ad
MidNite Solar MNPV6 #ad - Accessory type: photovoltaic combiner, capacity: 6 150v dc breakers, class Rating: ETL listed, Material Type: Injection molded insulating deadfront under aluminum flip-up exterior cover, Compatible With: 150V breakers, Dimensions L x W x H in.12 3/4 x 8 x 3 3/4, enclosure type: rainproof NEMA 3R aluminum enclosure Includes positive bus bar, negative bus bar.
Dc breakers protect wiring from potential fire in the event of module failure. This midnite solar photovoltaic combiner accepts dinrail mount breakers, ensuring compliance with NEC requirements for combiners when more than 2 strings of photovoltaic modules are installed. Knockouts for electrical connections and lightning arrestor mounting.
MidNite Solar MNSPD-115 Surge Protection Device #ad - Din rail for breaker mounting. Handles six 150V DC breakers. U. S. A. Etl listed for use in the u. S. And canada; check individual photovoltaic specs for required series fuse circuit breaker rating.
More details
#ad
Similar products
5
Renogy
#ad
RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect
#ad
Renogy 5MC4 #ad - You can feel that they are heavier & sturdier than other similar products in the market. Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.
Description renogy cable connectors are made with highest quality materials. This is to ensure the long term durability.
More details
#ad
Similar products
6
MidNite Solar
#ad
MidNite Solar Photovoltaic DC Circuit Breaker - 30 Amp, Model# MNEPV30
#ad
MidNite Solar MNEPV30 #ad - MidNite Solar MNSPD-115 Surge Protection Device #ad - Can also work as on-off switch for DC load circuits. Provides branch circuit protection for DC loads and is suitable for charge controller input and output disconnects. This midnite solar photovoltaic DC circuit breaker is a dinrail mount breaker that is specifically designed for photovoltaic combiners. Accessory type: dc circuit breaker, Compatible With: Photovoltaic combiner, Dimensions L x W x H in.
4 1/2 x 1/2 x 3 5/16, mount type: dinrail mount, amps: 30, class rating: meets NEC requirements Meets nec requirements for over current protection on both sides of charge controllers to protect wiring from potential fires in the event of controller failure.
More details
#ad
Similar products
7
TOOL-MC4
#ad
Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors
#ad
TOOL-MC4 TOOL-MC4 #ad - Hard plastic. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. Very handy for the assembly of custom Mc4 wires. 100% compatible with Renogy MC4 connectors.
MidNite Solar MNSPD-115 Surge Protection Device #ad - For breaking connections after they have already been locked together.
More details
#ad
Similar products
8
SELTERM
#ad
SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug
#ad
SELTERM #ad - Close end pad seals Out Moisture Keeping Cables Dry. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.
MidNite Solar MNSPD-115 Surge Protection Device #ad - Can be Crimped or Soldered. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Lugs are suitable for use with Welding Cables and Battery Cables. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.
Ul tested & Approved. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Heavy duty construction for Enhanced High Temperature Durability.
More details
#ad
Similar products
9
Signstek
#ad
Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm² Solar Panel PV Cable
#ad
Signstek #ad - High-precision ratchet mechanism for complete crimps. Portable style with perfect handle gripping position, light weight, logical structure and perfect handle shape design. Specification: awg:26-10AWG Crimping Range: 2. 5-6mm² model: ly-2546b mc4 solar crimping tools application: for non-insulated open plug-type connector Material:High carbon steel Weight: 550(g) Warranty: We only provide best quality products and best services for our customers.
We provide our customer guarantee and urgent response. Please feel free to contact us if you have any questions. Description: the excellent handling, easy exchange of the crimping insert bits and the possibility of adding a positioning aid are facts in favor of these crimping pliers. Package: 1xwire crimper Hardened and durable steel construction for years of reliable services.
MidNite Solar MNSPD-115 Surge Protection Device #ad - The design of accurate crimping moulds and complete locking ensure high of crimping quality when crimping repeatedly. High transmission of force to reduce the working fatigue according to lever control. Portable style with perfect handle gripping position, light weight, logical sructure and perfect handle shape design matching human being engineering principle, it guarantees perfect crimping effect.
Easy to operate while using pliers, just insert the top into its position and press it.
More details
#ad
Similar products
10
Midnite Solar
#ad
20 Amp, Model# MNEPV20 - MidNite Solar Photovoltaic DC Circuit Breaker
#ad
Midnite Solar MNEPV20 #ad - Midnite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. All of the NRTL listings still apply. 150vdc. Mnepv breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. Din rail mount. Made in USA. Etl listed in the US and Canada.
Always use a properly sized breaker for disconnecting. Breakers ordered under the cbi part numbering system will not be listed for 150VDC and in many cases are not suitable for the solar industry. All midnite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Midnite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada.
More details
#ad
Similar products
11
Midnite solar
#ad
DC AMMETER SHUNT 500 AMP 50 MILLIVOLT
#ad
Midnite solar MKB #ad - This is the industry standard shunt. Weight: 2 Lbs. Industry standard shunt. 500amp/50mv includes taptite mounting screws. Includes taptite mounting screws. Shunt, 500a/50mV. Has two 8-32 tapped holes on one end to attach a bus bar. Has two 8-32 tapped holes on one end to attach a bus bar.
More details
#ad
Similar products