DuraComm LP-14N Series Switching Desktop Power Supply

1
DuraComm
DuraComm LP-14N Series Switching Desktop Power Supply
DuraComm LP-14N - Lp-14n model includes a cord with Motorola SAE connector. Conversion for 240 volt ac input requires an internal adjustment by removing a "jumper wire” on the circuit board. When these supplies model lp-18 and LP-25 are lightly loaded and cool, the fan will not run. Additionally the power supplies incorporate an over temperature feature to protect against undesired component failure should operation in excessive environmental temperatures occur.
Duracomm lp series power supplies are compatible with all LPH radio hoods. As soon as the overload is removed, the output will be automatically restored. Two way radio/lmr/Telecommunication & Security Systems. Filtered & Regulated. These power supplies convert 120 or 240 volt 50/60 Hz AC power to low noise and ripple, regulated 13.
DuraComm LP-14N Series Switching Desktop Power Supply - 8 volt DC output. This should only be done by a qualified technician or should be specified at the time of purchase. Duracomm's power supplies are protected against inadvertent shorts and overloads by an electronic output current limiting circuit. When demand on the power supply increases and the internal temperature reaches 40°C, the fan will begin to run until the temperature drops below this threshold.
Lp-14n model includes a cord with Motorola SAE connector. Note: units are factory pre-set for 120 AC input.
More details